As one of Britain's biggest suppliers of sustainable, environmentally friendly roofing systems, ICB also provides a range of high performance accessories. The company recognises its customers' needs and acts upon them to deliver the very best in value for money and long term performance.
INSTA-STIK 750ml Roofing Adhesive is a single component, polyurethane adhesive that meets roofers' needs for a highly portable application for the fixing of rigid insulation boards on smaller commercial and residential roofs.
EvaTherm A is a closed cell, CFC and HCFC-free (zero ozone depletion), rigid polyisocyanurate foam for use in warm flat roofs under built-up felt, mastic asphalt and approved single ply membrane waterproofing systems. It is high performance, core faced both sides, with a perforated mineral coated glass fibre tissue.
EvaTherm D is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under built-up felt and approved single-ply membrane waterproofing systems. A layer of 6mm WBP plywood is bonded to the insulation board to provide additional strength and rigidity.
EvaTherm F insulation is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under mechanically fixed single-ply membrane waterproofing systems. With a multi-layer coated aluminum foil, it has an exceptionally low thermal conductivity of 0.022 W/mK.
EvaTherm L is a high performance rigid polyisocyanurate (PIR) foam board for use in warm roofs under a Liquid Applied Waterproofing system, such as the ICB Mariseal system. The board is tongue and grooved but taping the joints may provide a better finish with less ghosting of the joints being visible.
Evatherm T is a high performance rigid polyisocyanurate (PIR) foam board for use in warm flat roofs under torch-on, bituminous waterproofing systems. Evertherm T is a closed cell, CFC and HCFC-free (zero ozone depletion), rigid polyisocyanurate foam core faced board, with a mineral coated glass fleece on the reverse side and a bituminous glass fleece with a sacrificial polypropylene film on the top surface. It has an exceptionally low thermal conductivity of 0.024 W/mK.
EvaVap is a self-adhesive bituminous Vapour Barrier that forms a total barrier against vapour and gases. It consists of a self-adhesive low-thickness bituminous compound self protected by a glass fibre and a reinforced aluminium film.
A key element of rooftops are the vents and drainage units that provide air circulation and drainage.
ICB supplies a range of alwitra® venting systems and rainwater outlets. Manufactured to the highest standards, these units perform their functions effectively without negatively effecting the integrity of the roof.
Proper drainage in the form of outlets prevents the pooling of rainwater, which considerably reduces the expected lifetime of roof covering. Inadequate outlets may often themselves leak, causing significant damage to the internal layers of roofing. alwitra's specially designed outlet offers reliable drainage as part of the comprehensive system.
Multi ribbed retrofit drain that saves time and money. Multiple lip seals moulded onto the outside of the spigot give complete protection from leaking if the drain backs up. It's fitted by just pushing the new drain down through the old. To install with extra layers of insulation - just stop pushing when you reach the correct level. No gaskets to locate, no fasteners to tighten.
ICB offers alwitra® roof vents suitable for both warm and cold roofs. Manufactured to the highest standard, the venting provides superb air movement alongside reliable protection to rooftops.